Hard-wearing epoxy, polished concrete and sealed floors for warehouses, factories, workshops and industrial sites, completed by industrial flooring specialists across Brisbane, the Gold Coast and the Sunshine Coast.
An industrial floor has to take forklifts, pallet jacks, heavy loads and chemical spills, shift after shift, and keep performing without constant repair. That is exactly what our industrial floor solutions are built for. We grind, coat, polish and seal concrete into hard-wearing floors for warehouses, factories, workshops and distribution centres, finished to suit how the site is used.
Because we run every system in-house, the advice you get suits your operation, your loads and your budget, not one product we happen to push. We schedule around production, working nights, weekends or in zones so the site keeps moving.
From a single workshop to a multi-bay distribution centre, we match the system to the loads, chemicals and traffic the floor has to take.
Seamless epoxy and polished floors that take forklifts, pallet jacks and racking loads.
Hard-wearing, chemical-resistant floors built for production lines and heavy plant.
Oil and chemical-resistant epoxy coatings that wipe clean and handle hot tyres and tools.
Hygienic, joint-free sealed floors that meet wash-down and slip requirements.
Durable coatings that hold up to moisture, temperature swings and constant traffic.
High-gloss epoxy and polished floors that look sharp and take heavy retail traffic.
Built to work hard, look sharp and cost less to own over the life of the building.
A coated or polished slab is done once, with no soft covering to tear up and relay every few years, so it is the most economical industrial floor across the life of the site.
Takes forklifts, pallet jacks, racking loads and constant traffic without wearing out or lifting.
A seamless coated or sealed surface hoses and sweeps clean fast, with no seams or grout to trap oil, dust or product.
We work in zones, overnight or across a planned shutdown so production keeps running while we finish the floor.
We specify the coating, finish and line-marking to hit the slip rating and WHS requirements your site calls for.
A light-reflective polished or coated floor lifts visibility across the floor and helps keep the workspace safe.
We will recommend the right system for your site, traffic and budget.
The workhorse industrial floor. A seamless, chemical and abrasion-resistant coating for warehouses, factories and workshops, in solid colour or flake with slip-rated options.
Explore Epoxy Flooring
Mechanically ground and polished slabs for warehouses, showrooms and large floor plates that need a tough, dust-free, low-maintenance surface.
Explore Polished Concrete
Penetrating and topical sealers that dust-proof and protect bare or existing industrial slabs, plus resealing to bring a tired floor back to life.
Explore Concrete SealingFloor preparation matters before any new industrial floor, and it matters most before epoxy or polished concrete. A coating only bonds and lasts if the slab under it is sound, dry and correctly profiled. On an existing slab, old coatings, line marking, oil, glue and surface damage have to be ground off first. On a new slab, we grind out high and low spots so racking, traffic lanes and the new floor sit true. Prepare it properly and the floor lasts for years; rush it and even the best coating can lift or fail early.
Need the slab prepped first? See our concrete grinding and floor preparation page.
From a single workshop to industrial slabs running into the thousands of square metres, large-scale industrial flooring is everyday work for our crews.
Builders, site managers and operations teams across Brisbane consistently rate OzGrind five stars. Read our Google reviews before you commit.
Visit the OzGrind showroom to compare epoxy colours, flake blends and polished finishes before you commit.
Because industrial floors are large, we price them per job rather than off a calculator. After a quick site visit we lock in a fixed, no-obligation quote within 48 hours, so there are no surprises mid-project.
Industrial flooring is a finished concrete floor built for warehouses, factories and workshops. OzGrind does not supply slabs. We take an existing or new concrete slab and finish it to suit the demands of the site, by grinding, coating, polishing or sealing the surface. The result is one floor that handles forklifts, heavy plant, chemicals and wash-downs without the recurring cost and downtime of replacing it.
A snapshot of recent warehouse, factory and commercial floors across Brisbane, the Gold Coast and the Sunshine Coast.
"The team went above and beyond to ensure that the project was completed to the highest standards. This even included working long hours during the weekend. Wonderful work ethic. Very happy with the results."
"We recently used ozgrind to refurbish a 600sqm slab in a boat repair warehouse. The slab was in terrible condition, uneven, with holes and years of paint and fiberglass on it. The level of service and attention to detail and the effort they put into the job was outstanding. I have no problem recommending them to our friends and we will be using them again on our next project."
"Absolutely fabulous. The finish result is excellent and the tradesmen professional. OZGrind they're a bit pricey but it all comes down to, you get what you pay for... 10/10"
OzGrind has spent more than 15 years finishing industrial concrete floors across Brisbane, from warehouses and factories to workshops and distribution centres. An industrial floor has to earn its keep: it needs to take heavy plant, resist chemicals, stay safe and easy to clean, and keep performing for years without constant spend.
Because we run every system in-house, we match the finish to each environment instead of pushing one product across every job. Warehouses, factories and workshops usually suit industrial epoxy and coatings, large floor plates suit polished concrete, and bare or tired slabs can be protected with sealing and resealing. We also handle the surface preparation that every system depends on.
Big floor plates are routine for us. Our heavy-duty machinery and experienced crews deliver large industrial floors, and for sizable projects we travel Australia-wide. Refurbishing an existing site? Our warehouse and factory refurbishment service covers full floor make-overs. We work around your operation, scheduling after hours or in stages so there is no unplanned downtime, and we come back within 48 hours with honest advice and a no-obligation quote.
Some of the questions worth thinking through before you commit to an industrial concrete flooring system include:
Be clear on what your floor will cost to maintain over its life. Will you need to wax and buff regularly, or will an industrial polished concrete floor cut your maintenance, sweeping and mopping costs? A sealed or polished slab is one of the lowest-upkeep industrial floors you can choose.
Lighter colours make a space look larger and brighter, and a brighter space can help you get more out of your existing lighting. It is a small detail that changes how a warehouse or workshop feels day to day.
Once you start weighing up options you quickly realise the floor has to be easy to clean, chemical resistant, and able to take high foot and machinery traffic, and ideally heat, fire and impact resistant as well. Because industrial polished concrete is abrasion resistant, hard wearing and slip resistant, it suits high-traffic industrial and public premises. OzGrind are proficient in all types of industrial concrete flooring, including resin-based protective coatings like epoxy. Every floor we finish is durable, easy to maintain, visually appealing and can be made non-slip, and the right system can also reduce noise and vibration and improve safety. To talk through your requirements, contact OzGrind, the polished concrete flooring specialists.
An industrial polished concrete floor is as practical as it is good looking. It is quick and easy to clean, shrugs off heavy traffic, and adds genuine character to a warehouse, showroom or workshop. You choose the build first, either grind and seal or mechanically polished concrete, then dial in the level of stone exposure, gloss and colour to suit the space.
Pricing on large industrial floors is worked out per job after a site visit, not off an online calculator, so the number reflects your slab and site. You can still see and touch every colour and finish in person at our Brisbane showroom or take the virtual 360° tour from anywhere, then work directly with our qualified tradespeople through to a finished floor.
Tell us about your site and we will come back within 48 hours with honest advice and a no-obligation quote for your industrial floor.
Brisbane based, finishing warehouse, factory and industrial floors across the Gold Coast, Sunshine Coast and surrounding regions, with large projects undertaken Australia-wide.
Cost comes down to the system you choose, the size and condition of the slab and the site. Larger floors attract better per-square-metre rates, and sealing and epoxy sit at the economical end while polished concrete is the premium option. Because industrial floors run well beyond our online calculator’s range, we price them per job, so ask for a fixed quote and we will size it to your slab and site.
You want a floor that takes heavy plant, resists chemicals and is easy to clean. We usually recommend industrial epoxy or polished concrete, depending on loads, wash-downs and slip requirements, and we assess the slab and spec the right system for your operation.
Yes. Most industrial work is staged after hours, across weekends or in zones so production and dispatch keep moving. We map the staging with you before we start, so the floor is finished without unplanned downtime.
Both perform well. Epoxy suits workshops and factories that need chemical resistance and wash-downs; polished concrete suits warehouses and large floor plates that want a tough, dust-free, low-maintenance surface. We spec the right one for your site.
That comes down to the floor area, the system chosen and how much grinding or repair the slab needs. You get a clear program with your quote and we work to it, phasing the job around your shifts where needed.
Yes. We grind back, repair and refinish or recoat the slab you already have, so most sites do not need any new concrete. For a full floor make-over, ask about our warehouse and factory refurbishment service.
Yes. Our heavy-duty machinery and crews are built for big floor plates, and for major industrial jobs we mobilise Australia-wide, with travel and accommodation built into the project.
Yes. We work across Brisbane, the Gold Coast, the Sunshine Coast and Toowoomba, and we travel Australia-wide for larger industrial projects.
